Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal

Greetings Simon,

At the present time, we are still waiting for the one we purchased to
arrive.  My fear is that we will not have all of the parts with it, so I
could take you up on this! I will certainly give anyone who doesn't have
one at all first chance though. :)

Cheers-
Russell




------------------------------------
VaxDesign Corporation
Russell G Higbee, MS, PhD, DVM
Senior Scientist
[log in to unmask]
2721 Discovery Dr.
Suite 400
Orlando, FL  32826
tel: 407-249-3658
fax: 407-249-3649
------------------------------------

-----Original Message-----
From: Confocal Microscopy List [mailto:[log in to unmask]] On
Behalf Of simon watkins
Sent: Monday, February 19, 2007 3:08 PM
To: [log in to unmask]
Subject: Re: DUPONT SORVALL GKM KNIFEMAKER

Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal

Russell do you want another of these? We have one you can have gratis
(well I might ask you to give me a fedex number... If you don't want it
does anyone else??
S

-----Original Message-----
From: Confocal Microscopy List [mailto:[log in to unmask]] On
Behalf Of Sharon Frase
Sent: Monday, February 19, 2007 2:50 PM
To: [log in to unmask]
Subject: Re: DUPONT SORVALL GKM KNIFEMAKER

Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal

Russell,
I enjoyed speaking to you. Please let me know if you need a part to use
as a model. 
Sharon Frase
Associate Director
Integrated Microscopy Center
University of Memphis
901 678 4233
[log in to unmask]

________________________________

From: Confocal Microscopy List on behalf of Russell Higbee
Sent: Mon 2/19/2007 9:03 AM
To: [log in to unmask]
Subject: DUPONT SORVALL GKM KNIFEMAKER


Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal
Greetings All - happy "presidents day" !!
 
I'm looking for an owners / operations manual for a DUPONT SORVALL GKM
KNIFEMAKER.  If you are aware of any out there (pdf would be fantastic),
please let me know.  We've acquired one, and would like to know 1) if we
are missing any parts; 2) what the groove in the front is for (ie:
missing parts); 3) does it make good glass knives? 4) description of
adjustments to make different widths of knives.  Any help on this would
be greatly appreciated.
 
Thanks in advance for your attention to this request!
 
Cheers-
Russell
 
 
Russell G. Higbee, MS, PhD, DVM
Senior Scientist
VaxDesign Corporation
Suite 400
Orlando, FL 32826
407-249-3658
407-249-3649 (FAX)