Subject: | |
From: | |
Reply To: | |
Date: | Fri, 6 Oct 2006 13:26:10 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal
Hello,
I think the paper Xuejun mentioned in (4) is
Simple Method for Reduction of Autofluorescence in Fluorescence
Microscopy
Michael Neumann and Detlef Gabel
The journal of Histochemistry & Cytochemistry
Vol 50(3) 437-439 2002
Regards
Lai Ding
-----Original Message-----
From: Confocal Microscopy List [mailto:[log in to unmask]] On
Behalf Of Xuejun Sun
Sent: Friday, October 06, 2006 12:42 PM
To: [log in to unmask]
Subject: Re: brain autofluorescence
Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal
Hello,
The issue has been discussed before and you may check the archive. The
main
thing is to identify the source of auto-fluorescence.
Here are few options:
1) Chemical treatment using CuSO4 or Sudan black (Schnell SA, Staines
WA,
Wessendorf MW.; J Histochem Cytochem. 1999.
Check also: Baschong et. al., J. Histochem. Cytochem. 2001
49(12):1565-1571.
2) Use spectral imaging if you have access to one such instrument. If
you
can get a decent spectra of your signal, spectral imaging perform well
in
removal of autofluorescence.
3) You may be able to use another laser line to image the
auto-fluorescence
signal and perform some image math. to subtract autofluroscence from
your
signal channel. You need a control slide. But it is very effective and
can
be done online with most confocals.
4) I read sometime ago using a light-box at low temperature to bleach
out
autofluorescene prior to staining. But I do not remember the references
(sorry).
Good luck!
Xuejun
Xue-jun Sun, Ph.D.
Dept. Exp. Oncology
Cross Cancer Institute
11560 University Ave,
Edmonton Alberta T6G 1Z2
Canada
Phone: (780) 432-8898
Fax: (780) 432-8425
-----Original Message-----
From: Confocal Microscopy List [mailto:[log in to unmask]] On
Behalf Of Soumitra Ghoshroy
Sent: Friday, October 06, 2006 8:12 AM
To: [log in to unmask]
Subject: brain autofluorescence
Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal
Hello Everyone,
We have an user who wants to label an enzyme in hypothalamus using
immunoflurescence. We used Alexa Fluor 647 as secondary in paraffin
embedded
tissue and discovered that the tissue is autofluorescing in almost every
laser
line. I am not at all familiar with brain tissue. We also used
unlabeled
deparaffinized sections and looked at it and the autofluorescence level
is
extremely high. So I would like to get some advice on how to image it.
Is
there
anything we are not doing right? The tissue was fixed with 4%
paraformaldehyde.
Thanks in advance.
Soumitra
************************************************************************
****
***
Soumitra Ghoshroy
College Associate Professor, Biology
Director, Electron Microscopy Lab
New Mexico State University
Las Cruces, NM 88003
Tel: 505-646-3268 (office)
505-646-3283 (lab)
Fax: 505-646-3282
http://biology-web.nmsu.edu/ghoshroy/ghoshroy.htm
http://emldata.nmsu.edu
This e-mail and any attachments may contain confidential and
privileged information. If you are not the intended recipient,
please notify the sender immediately by return e-mail, delete this
e-mail and destroy any copies. Any dissemination or use of this
information by a person other than the intended recipient is
unauthorized and may be illegal.
|
|
|