*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
*****
Daer all,
We are working with Andor software and this will work fine, after having
some additional back-up/support.
Best,
Tineke Vendrig
technical engineer optical microscopy
Delft University of Technology
Bionano Science
Kavli Institute of Nanoscience
Lorentzweg 1
2628LJ Delft
room F185
Tel: +31 15 2781428
Fax:+31 15 2781202
email: [log in to unmask]
mobile phone: +31 624341412
2012/1/5 Paul Rigby <[log in to unmask]>
> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> *****
>
> Hi All,
> I have also been trying to control an IX81 with almost the identical
> hardware to Bernhard (Prior stage, ZDC etc) using Micromanager. However, I
> have been unable to get our computer (and Micromanager) to successfully
> talk with the Olympus control box via the serial port. I suspect the serial
> port settings. If anyone has done this successfully, can you please let
> me/us know what settings you used or what has worked best.
>
> Many thanks.
> Paul
>
> Assoc. Prof. Paul Rigby
> Centre for Microscopy, Characterisation & Analysis (M510)
> The University of Western Australia
> 35 Stirling Highway
> Crawley WA 6007
> Australia
>
> -----Original Message-----
> From: Confocal Microscopy List [mailto:[log in to unmask]]
> On Behalf Of John Oreopoulos
> Sent: Thursday, 29 December 2011 4:37 AM
> To: [log in to unmask]
> Subject: Re: software to control Olympus IX81 for video microscopy
>
> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> *****
>
> Check out MicroManager when you get a chance.
>
> John Oreopoulos
>
> On 2011-12-28, at 2:19 PM, Bernhard Kuhn <[log in to unmask]>
> wrote:
>
> > *****
> > To join, leave or search the confocal microscopy listserv, go to:
> > http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> > *****
> >
> > Dear All,
> >
> > We have an Olympus IX81 with a motorized stage Prior Proscan II,
> microscopy
> > control unit IX2-USB and Olympus Laser- Based Autofocus System (IX2-ZDC).
> >
> > The camera is a Hamamatsu EM-CCD C9100-02, controlled with A3472-07.
> >
> > We are using this unit for multi-location, multi-time microscopy ~30
> > locations for ~150 acquisitions per experiment.
> >
> > What software and operating system do people recommend to control this
> > setup?
> >
> > Is there anyone with a similar setup who can make software
> recommendations?
> >
> > Thank you and Happy New Year,
> >
> > Bernhard Kuhn
>
|
