August 2015


Options: Use Monospaced Font
Show HTML Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Paul Eric Wolff <[log in to unmask]>
Reply To:
JEOL-Focused Probe Users List <[log in to unmask]>
Mon, 17 Aug 2015 11:34:32 +0200
text/plain (1396 bytes) , text/html (3978 bytes)
Dear Probe community,

please apologize double posting!

Since our very old carbon coater died a couple of weeks we are now looking to buy a new machine. At the moment we are using a Balzers EVM052, which uses a carbon rod and we were able to coat up to 6 thin section (2.7x4.7 cm) in one go.
Our new machine should be also able to coat the same amount of samples. Therefore we are looking for a machine, which uses carbon rods, comes with a large vacuum chamber and a large distance between target and sample to provide homogeneous coating. Furthermore, a rotary table would be good too. 
We highly appreciate if some of you can report experience with the new generation models and help us choosing the right model. 
If someone is using a Balzers EVM052 machine it would be good to get in touch for possible troubleshooting. 

Thanks in advance and regards to all of you
Dr. Paul Eric Wolff
[log in to unmask]

Institute of Mineralogy
Leibniz University of Hannover
Callinstr. 3, 30167 Hannover, Germany
Tel. +49 511 762 4818
Fax +49 511 762 3045

JEOL Probe Users Listserver

Moderator: Anette von der Handt, [log in to unmask],
Electron Microprobe Lab, University of Minnesota

Post a message: send your message to [log in to unmask]

Unsubscribe: send "SIGNOFF PROBEUSERS" to [log in to unmask]

On-line help and FAQ: