Hi John,
Yes the full "hypermap" is stored during a WDS/EDS acquisition. You can
add elements after the measurement is complete and the software creates
the new maps. I however never found a way to see/extract the spectrum
from a single pixel.
Regards,
Philippe
On 15-01-27 01:21 AM, Peter McSwiggen wrote:
> Hi John,
>
> Yes, the JEOL EDS system with the 8230 and the 8530F are SSD, and they
> do full spectral imaging. The user simply selects a check box and the
> full spectrum is collected at each pixel.
>
> Regards,
> Pete
>
>
> Peter McSwiggen
> McSwiggen & Associates, P.A.
> 2855 Anthony Lane South, Suite B1
> St. Anthony, MN 55418-2883 USA
> phone: 612.781.2282
> e-mail: [log in to unmask] <mailto:[log in to unmask]>
> web: www.McSwiggen.com <http://www.McSwiggen.com>
>
> On Jan 26, 2015, at 5:19 PM, John Fournelle wrote:
>
>> I am unclear whether the JEOL EDS system supplied with 8230 and 8530
>> are SiLi or SDD. I would assume SDD, but in discussing this question
>> with at least one 8530 lab (with integrated Jeol EDS), there was no
>> apparent evidence that a complete spectral pattern was acquired either
>> in spot mode or mapping mode (of course, ROIs were easily defined and
>> acquired).. Can someone clarify is for me? Thanks
>>
>> John
>>
>> John Fournelle
>> Senior Scientist
>> Director, Electron Probe and SEM Lab
>> University of Wisconsin Dept of Geoscience
>> Madison, Wisconsin 53706
>> Cell 608-438-7480
>>
>> ****
>> JEOL Probe Users Listserver
>>
>> Moderator: Anette von der Handt, [log in to unmask]
>> <mailto:[log in to unmask]>,
>> Electron Microprobe Lab, University of Minnesota
>>
>> Post a message: send your message to [log in to unmask]
>> <mailto:[log in to unmask]>
>>
>> Unsubscribe: send "SIGNOFF PROBEUSERS" to [log in to unmask]
>> <mailto:[log in to unmask]>
>>
>> On-line help and FAQ: http://probelab.geo.umn.edu/listserver.html
>>
>>
>>
>> *
>>
>
> **** JEOL Probe Users Listserver
>
> Moderator: Anette von der Handt, [log in to unmask], Electron Microprobe
> Lab, University of Minnesota
>
> Post a message: send your message to [log in to unmask]
>
> Unsubscribe: send "SIGNOFF PROBEUSERS" to [log in to unmask]
>
> On-line help and FAQ: http://probelab.geo.umn.edu/listserver.html
>
> *
>
****
JEOL Probe Users Listserver
Moderator: Anette von der Handt, [log in to unmask],
Electron Microprobe Lab, University of Minnesota
Post a message: send your message to [log in to unmask]
Unsubscribe: send "SIGNOFF PROBEUSERS" to [log in to unmask]
On-line help and FAQ: http://probelab.geo.umn.edu/listserver.html
*
|