Hi John, Yes the full "hypermap" is stored during a WDS/EDS acquisition. You can add elements after the measurement is complete and the software creates the new maps. I however never found a way to see/extract the spectrum from a single pixel. Regards, Philippe On 15-01-27 01:21 AM, Peter McSwiggen wrote: > Hi John, > > Yes, the JEOL EDS system with the 8230 and the 8530F are SSD, and they > do full spectral imaging. The user simply selects a check box and the > full spectrum is collected at each pixel. > > Regards, > Pete > > > Peter McSwiggen > McSwiggen & Associates, P.A. > 2855 Anthony Lane South, Suite B1 > St. Anthony, MN 55418-2883 USA > phone: 612.781.2282 > e-mail: [log in to unmask] <mailto:[log in to unmask]> > web: www.McSwiggen.com <http://www.McSwiggen.com> > > On Jan 26, 2015, at 5:19 PM, John Fournelle wrote: > >> I am unclear whether the JEOL EDS system supplied with 8230 and 8530 >> are SiLi or SDD. I would assume SDD, but in discussing this question >> with at least one 8530 lab (with integrated Jeol EDS), there was no >> apparent evidence that a complete spectral pattern was acquired either >> in spot mode or mapping mode (of course, ROIs were easily defined and >> acquired).. Can someone clarify is for me? Thanks >> >> John >> >> John Fournelle >> Senior Scientist >> Director, Electron Probe and SEM Lab >> University of Wisconsin Dept of Geoscience >> Madison, Wisconsin 53706 >> Cell 608-438-7480 >> >> **** >> JEOL Probe Users Listserver >> >> Moderator: Anette von der Handt, [log in to unmask] >> <mailto:[log in to unmask]>, >> Electron Microprobe Lab, University of Minnesota >> >> Post a message: send your message to [log in to unmask] >> <mailto:[log in to unmask]> >> >> Unsubscribe: send "SIGNOFF PROBEUSERS" to [log in to unmask] >> <mailto:[log in to unmask]> >> >> On-line help and FAQ: http://probelab.geo.umn.edu/listserver.html >> >> >> >> * >> > > **** JEOL Probe Users Listserver > > Moderator: Anette von der Handt, [log in to unmask], Electron Microprobe > Lab, University of Minnesota > > Post a message: send your message to [log in to unmask] > > Unsubscribe: send "SIGNOFF PROBEUSERS" to [log in to unmask] > > On-line help and FAQ: http://probelab.geo.umn.edu/listserver.html > > * > **** JEOL Probe Users Listserver Moderator: Anette von der Handt, [log in to unmask], Electron Microprobe Lab, University of Minnesota Post a message: send your message to [log in to unmask] Unsubscribe: send "SIGNOFF PROBEUSERS" to [log in to unmask] On-line help and FAQ: http://probelab.geo.umn.edu/listserver.html *