Dear Probe community,
please apologize double posting!
Since our very old carbon coater died a couple of weeks we are now looking to buy a new machine. At the moment we are using a Balzers EVM052, which uses a carbon rod and we were able to coat up to 6 thin section (2.7x4.7 cm) in one go.
Our new machine should be also able to coat the same amount of samples. Therefore we are looking for a machine, which uses carbon rods, comes with a large vacuum chamber and a large distance between target and sample to provide homogeneous coating. Furthermore, a rotary table would be good too.
We highly appreciate if some of you can report experience with the new generation models and help us choosing the right model.
If someone is using a Balzers EVM052 machine it would be good to get in touch for possible troubleshooting.
Thanks in advance and regards to all of you
JEOL Probe Users Listserver
Dr. Paul Eric Wolff
Institute of Mineralogy
Leibniz University of Hannover
Callinstr. 3, 30167 Hannover, Germany
Tel. +49 511 762 4818
Fax +49 511 762 3045
Moderator: Anette von der Handt, [log in to unmask],
Electron Microprobe Lab, University of Minnesota
Post a message: send your message to [log in to unmask]
Unsubscribe: send "SIGNOFF PROBEUSERS" to [log in to unmask]
On-line help and FAQ: http://probelab.geo.umn.edu/listserver.html