*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
*****
rubber cement, two sided scotch tape, paraffin, dental wax, postit note
folded so adhesive is on both sides, gelatin....
On Mon, Jun 25, 2012 at 10:45 AM, Mark Cannell <[log in to unmask]>wrote:
> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> *****
>
> Three thoughts:
>
> PVA blobs which can be peeled after setting or hot glue (stronger -harder
> to peel). Nail varnish is good too. I've used all 3 but YMMV depending on
> area of contact etc.
>
> HTH
>
> Mark
>
>
> On 25/06/2012, at 4:38 PM, Tobias Rose wrote:
>
> > *****
> > To join, leave or search the confocal microscopy listserv, go to:
> > http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> > *****
> >
> > Dear all,
> >
> > I need to glue some glass optics onto anodized aluminum surfaces (edges
> of coated dichroic mirror surface and of a full reflective silver mirror).
> The problem is that I'd like to be able to remove the mirrors at some point
> without completely ruining their reflective surfaces and leaving too much
> residue on the glass and aluminum.
> > The glued parts are not in the optical path so the glue does not have to
> be transparent. Also the glue can be quite weak, just enough so that the
> mirrors don't fall off.
> >
> > Can anyone suggest a nice glue for that?
> >
> > Best,
> > Tobias
>
--
Michael J. Herron, U of MN, Dept. of Entomology
[log in to unmask]
612-624-3688 (office) 612-625-5299 (FAX)
|