CONFOCALMICROSCOPY Archives

July 2011

CONFOCALMICROSCOPY@LISTS.UMN.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Damir Sudar <[log in to unmask]>
Reply To:
Confocal Microscopy List <[log in to unmask]>
Date:
Tue, 26 Jul 2011 12:27:37 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (65 lines)
*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
*****

another option: Not as cost-effective as the ones on your list but 
functionally quite effective is Zeiss's Aquastop. See: 
http://www.zeiss.de/C12567BE00472A5C/ContainerTitel/Axio_Observer/$File/sicherer2_en.html

No commercial interest, just a customer.
- Damir

On 7/26/2011 11:47 AM, Elke Kuster-Schock wrote:
> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> *****
>
> Hello,
>
> I was hoping for input on how to protect the objectives on an inverted scope
> from oil running down the sides, and ultimately into the objective.
>
> We are running a core facility with many users, and the obvious solution (use
> less oil) doesn't seem to be obvious to some of them.
> Especially on our Zeiss LSM 510s, due to the design of the objectives, we see
> that oil finds its way into the objectives (and in one extreme case, even back
> out of the bottom), and we are wasting time and resources to clean and repair
> them.
>
> I've looked around the web, and brainstormed with colleagues, and found the
> following:
>
> 1 - Cut a finger off an examination glove, cut a small hole at the end, and slip
> over entire objective.
> Concerns: Does the glove fit tight enough so that oil doesn't get sucked under
> it by capillary action? Will the oil degrade latex/nitrile?
>
> 2 - Put an O-ring around objective as an "oil dam."
> Concerns: Similar to 1, worries about tightness of seal, and stability of
> material. What kind of O-ring should I look for? Simple rubber band?
>
> 3 - Create a drip collar (similar to wine bottle collar) by wrapping layers of
> lens paper or other tissue around objective and securing with rubber band.
> Concerns: Similar to 1 and 2.
>
> I would appreciate if people on the forum could give feedback on methods that
> have worked for them.
> Thanks,
> Elke
>
>
> ----------------------------------------------------------------
> Elke Küster-Schöck
> CIAN (Cell Imaging and Analysis Network)
> Proteomics&  Genomics Coordinator, Microscopy Associate
> McGill University, Montreal QC, Canada

-- 
Damir Sudar - Staff Scientist and Deputy for Technology
Lawrence Berkeley Laboratory / Life Sciences Division
One Cyclotron Road, MS 977R225A, Berkeley, CA 94720, USA
T: 510/486-5346 - F: 510/486-5586 - E: [log in to unmask]
WWW: http://www.lbl.gov/lifesciences/labs/sudar_lab.html

ATOM RSS1 RSS2