Content-Type: |
text/plain; charset="us-ascii" |
Date: |
Fri, 29 Apr 2011 19:50:16 -0500 |
Reply-To: |
|
Subject: |
|
From: |
|
MIME-Version: |
1.0 |
In-Reply-To: |
|
Content-Transfer-Encoding: |
quoted-printable |
Sender: |
|
Parts/Attachments: |
|
|
*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
*****
Michal, I was intrigued by your insistence despite the opinions against so I could not resist the temptation to look at the LSM700 brochure and indeed it is advertised as Lambda Scan capable by means of the VSD (variable secondary dichroic beamsplitter)... so I think you might be in the right track... hope your Zeiss rep gives you a positive response, good luck
Leoncio A. Vergara MD
Assistant Director
Center for Biomedical Engineering
Assistant Professor
Microbiology and Immunology
University of Texas Medical Branch
409-750-2153 (cell)
-----Original Message-----
From: Confocal Microscopy List [mailto:[log in to unmask]] On Behalf Of Michal Gdula
Sent: Friday, April 29, 2011 7:01 PM
To: [log in to unmask]
Subject: Re: Question about Zeiss LSM700 and spectral imaging
*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
*****
Thank you for your fast response!
This was also what the owner of the microscope claimed, however in the
specification from zeiss site it is wrtten:
"Spectral detection Simultaneously in two confocal reflection channels, with high-
sensitivity, low-noise PMTs,
adjustable (increment 1 nm)"
http://www.zeiss.com/C12567BE00472A5C/EmbedTitelIntern/LSM700_Specificatio
n/$File/LSM700_Specification.pdf
and it is also repeated in the product brochure - 2 mistakes in Zeiss
documentation? additionaly in manual are information on scanning in lambda
mode... I will try to call Zeiss, but still hopes to get in touch with somebody who
used LSM700 for spectral imaging...
Regards,
Michal
|
|
|