I run an LSM410 with Win 3.11 on a local network (NT server) without
problem.

I use the TCP/IP driver for Windows 3.11 (available free on the Web), not a
DOS driver.

For my ethernet card I use IRQ10, base address 0x280 and don't forget to
exclude some reserved RAM specific to your card (in my case X=D000-D3FF) in
your EMM386 device. If you want more details you can email me directly.



***********************
Hugo Dilhuydy, ing.
Laboratoire de microscopie
Centre de recherche
Institut universitaire de gériatrie de Montréal
4565 chemin Queen-Mary
Montréal (Québec)
H3W 1W5 CANADA
Tél: (514)-340-3540 poste 3222
Fax: (514)-340-2801
http://www.criugm.qc.ca

----- Original Message -----
From: Keith Williams <[log in to unmask]>
Newsgroups: bit.listserv.confocal
To: <[log in to unmask]>
Sent: Thursday, June 22, 2000 3:04 AM
Subject: Problem Running Zeiss LSM410


> Our computer department installed a network card on our PC
> running the Zeiss lsm410 workstation. Now we are unable to get the
> system up and running. I suspect that it is probably some interrupt,
> IRQ compatibility problem. Unfortunately the system still runs on
> Win 3.11
>
> I've removed all the network drivers, but the problem still remains.
>
> The lsm hardware does initialise upon starting up the PC. The
> matrox imaging boards pass the diagnostics. Any ideas / possible
> solutions?
>
> Your input and help would be MUCH appreciated.
>
> Thanks
> Keith Williams
>
>
> ********************************
> Keith Williams
> Diabetes Research Unit
> Medical Research Council
> South Africa
> Tel: +27 21 9380208
> Fax: +27 21 9380456
> email: [log in to unmask]
> ********************************
> Remember the ICEM-15 in Durban
> from 1-6 September 2002.
> http://www.icem15.com