Subject: | |
From: | |
Reply To: | |
Date: | Wed, 31 Mar 2004 15:20:56 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal
It would also be a good idea to make sure the software build you are
running is up to date--I think the 1227a and later builds have more
robust ROI functionality, and the buttons are present on the viewer side
bar by default.
-Karl
Schwartz, Owen (NIH/NIAID) wrote:
>Search the CONFOCAL archive at
>http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal
>
>Dear All,
>
> I would like to second Russell's reply. You certainly can scan ROIs
>in the Leica software. I would only like to add that in addition to the ROI
>button and the config buttons it is usefull to add the three region tools
>and the select button. You will need the region tools to let you define a
>cirular, rectangular, or free-from ROI. The select button allows you to
>select an existing ROI and move it. I normally add all of these to a
>toolbar on the side of the image viewer window. To keep them there
>permanently, after adding the toolbar, go to settings>viewer> and click "add
>active viewer", then check the box beside the active viewer.
>
>Cheers,
>
>Owen
>
>
--
Karl Garsha
Light Microscopy Specialist
Imaging Technology Group
Beckman Institute for Advanced Science and Technology
University of Illinois at Urbana-Champaign
405 North Mathews Avenue
Urbana, IL 61801
Office: B650J
Phone: 217.244.6292
Fax: 217.244.6219
Mobile: 217.390.1874
www.itg.uiuc.edu
|
|
|